Brothers Gutters | Gutterglove Pro | Gutterglove Ultra | LeafBlaster | No Clog | Gutter Guards | Gutters Guard | Virginia | VA | Lynchburg | 434.237.7711
Gutterglove Pro (Best) Gutterglove Ultra (Great) LeafBlaster (Good) Guards We Won't Use Common Questions
Gutterglove Products

If you are interested in setting up a free consultation please fill out the form below

Client Information
  *required information


About Your Project
Please describe your gutter concerns or type of project you are looking for us to provide a solution for:




Consumer Reports Gutter Guards


Guterglove PRO (Best)
Gutterglove Pro
is our flagship gutter protection system and considered to be the Cadillac of all gutter guards by many. If you want the absolute best, then the Gutterglove Pro Series is the way to go. The Gutterglove Pro gutter guards offer our tightest woven mesh filtering system with the largest amount of mesh surface area, enabling it to handle the largest amount of water and keeping out the smallest debris.

Gutterglove ULTRA (Great)
We consider Gutterglove ULTRA
our mid-grade gutter protection system. Gutterglove Ultra is a little more affordable than Gutterglove Pro, yet offers all the same efficient flitering functionality. A thinner aluminum profile was introduced in this model to lower the cost but not the quality. Also the mesh is a little more open on this model, and the main opening containing the mesh is slightly smaller than the Gutterglove Pro.

LeafBlaster (Good)
LeafBlaster (Good)
is our lowest priced gutter protection system. LeafBlaster offers the same efficient filtering functionalities of keeping the leaves, pine needles, seed pods and sand out of your gutter as Gutterglove Pro and Ultra. It doesn’t utilize a support frame underneath, but uses a series of corrugations in the mesh to give it support and strength.

Gutterglove Pro / Gutterglove Ultra / Gutterglove Icebreaker:


Gutterglove Pro, Gutterglove Ultra and Gutterglove IceBreaker consists of two components, a perforated aluminum channel and type 316 stainless steel mesh. Gutterglove QualityThe stainless steel mesh is glued into grooves along both sides of each 5 foot aluminum channel section. It installs on any existing gutter. Gutterglove's specifications were designed so that it simply slips under the roof shingles and fits snuggly to the front lip of your gutter. Gutterglove should be installed at the same pitch as the roof (up to 5/12) to get the best performance of debris shedding off. However, it's not necessary to install Gutterglove at greater then a 30 degree pitch.

Aluminum Channel Frame:
Aluminum Channel Frame: The extruded aluminum support frame is anodized to further protect itself from the environment and to make it more adaptable to be installed on a copper gutter. The anodizing process converts the aluminum surface into an extremely hard, durable, corrosion resistant, long-lasting aluminum oxide finish. Anodizing also responds favorably to current governmental regulations because it is one of the most environmentally friendly industrial processes. Since this process is a reinforcement of a naturally occurring oxide process, it is non-hazardous and produces no harmful or dangerous by products. Anodized aluminum is used around the world as highly durable exteriors in commercial buildings such as one of the world’s tallest buildings, the Sears Tower in Chicago, Illinois. Other revolutionized uses are in scientific instruments, home appliances, satellites in space for harsh environmental protection, staircases in skyscrapers and a host of other uses.

Gutterglove is the ONLY gutter guard in existence that uses an anodized extruded aluminum profile.

Stainless Steel Mesh:
The super-strong type 316 stainless steel mesh allows more than 150 inches of hourly rainfall to filter through to your gutter.Type 316 is molybdenum-bearing austenitic stainless steel which is more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium nickel austenitic lower quality stainless steels such at types 302 and 304 or any other standard stainless steel alloys. The pots and pans manufacturers that are highly promoted at home and garden shows for their non-corrosive attributes are only type 304 stainless steel.
Gutterglove QualityThe 316 alloy offers higher creep, stress-to-rupture and tensile strength at elevated temperatures. It also resists attack of marine and corrosive industrial atmospheres which makes it an ideal component for Gutterglove. Type 316 stainless steel alloy is widely used in the food, marine and medical industries.

Request a Quote today and have a Solutionist© visit your home to determine the best solution for you.

Untitled Document

Copyright © 2005-2012, Inc. All rights reserved.

Facebook Icon Brothers Blog Twitter Logo YouTube Remodeling and Home Design LinkedIn Logo Google+